Nokia C7 RM-675 RC Belle 111.030.0607 - Belle Hack for C7 (Only for C7)

• Download Phoenix_Service_Software_2011.02.000.44842.rar
• Download Nokia_C7_RM-675_RC_Belle_Euro3.rar. (Note that its not a hacked firmware, you need to manually hack it using Norton Hack)
• Note that Your phone doesn't need to be on Symbian Anna, it could be even on PR 1.0.
• Make sure you have placed the above firmware files in folder path:
• C:/Program Files/Nokia/Phoenix/Products/RM-675
• Run Phoenix and hit File > Open Product
• Type "RM-675" in Type Filter and select OK
• Make sure the connection mode is: NO CONNECTION and switch off your Nokia C7 and plug in the USB cable (We have to flash in DEAD USB mode and No connection is a necessary requirement)
• Now goto Flashing > Firmware Update > Product Code: Hit on (...) button to select it and select OK.
• Now TICK DEAD PHONE USB FLASHING.
• Hit options button and a window will appear to set the flashing files and parameters.
• You would notice two red files. One is *ROFS3.FPSX and the other one is *EMMC.FPSX
• Delete the *EMMC.FPSX and manually edit *ROFS3.FPSX and replace it with the *ROFS3.FPSX file which you had placed inside RM-675 folder. Hit OK.
• Now click on the Refurbish button to begin flashing process.

Watch video for more easier:




Changelog:
-Nokia C7 RM-675 Original RC Belle 111.030.0607
-No hack
-No calibrated
-Rofs3 cleaned
-Original Rofs3 not public! Nokia includes diagnostic software. Illegal! Please no private message!
-Please flash Nokia C7 RM-675 Original Anna Rofs3!!!!
-A protected Core file can not be calibrated.
-Hacked UDA upload.




Warning - As the OP stated that this hasn't been tested, members requested to test it on their own responsiblity since there is no way to downgrade also. //nicesoni_ash

New Symbian hack with Trend Micro Mobile Security Anti virus for Symbian^3 Anna Belle

Previously we had Dr Web's and UMU Mobile Security Hacking Methods for Symbian, that helped to remove certificate errors and enable installation of unsigned apps / games. Now here comes Norton Symbian Hack by CoDeRus.

1. Install [NokiaVNN.com]NortonSymbianHack_S60v3_s60v5_S^3_S^4.sisx from the download package below.


2. Launch Norton


3. Go Options- Anti-Virus - Quarantine list


4. Go Options - Restore, accept prompt


5. Exit application, delete from App manager (Symantec Symbian Hack). Also delete c:\shared\ folder.
6. Install [NokiaVNN.com]RomPatcherPlus_3.1.sisx from the download package below.
7. Launch and apply patches:
- Open4all for full access to file system
- Installserver for installing any unsigned applications (if you see a red cross on install server patch in Rom Patcher - get installserver.exe from here and enable OPEN4ALL patch from ROM Patcher then move installserver.exe to C:/Sys/Bin via X-plore.)


Set patches to auto if needed (Options - Add to auto)
Click below to download :

[NokiaVNN.com] NortonSymbianHack_S60v3_s60v5_S^3_S^4.zip

RomPatcherPlus V3.1 Symbian^3 Nokia N8 C7 E7 X7 E6 C6-01 - Free App Download

ROMPATCHER+ v3.1
RomPatcher+ is an improved and fixed version of the RomPatcher software developed by ZoRn.
Using RomPatcher+ it is possibile to reach a new level of customization for you Symbian phone.


This is the list of the main differences in comparison with RomPatcher by ZoRn:
- New: compatibile with all the 3rh, 5th, S^3 devices
- New: support for compiled patches
- New: can dump the whole rom content to file \romdumpplus.dmp
- New: can dump the SuperPage content to file \superpage.dmp
- New: full support for DomainSrv.exe autostart, with Recovery Fault
- New: introduced new commands ord_rel, ord_snr which allow to patch DLL using ordinal
- New: can be integrated in cooked ROM firmware
- New: it is now possible to apply/remove patches with just 1 click.
- New: added vertical scrollbar.
- New: introduced the new command "+SuperPage" which allow to patch the RAM area where is stored the SuperPage.
- New: introduced support for a new commands, info: return: error: check the demo1-4.rmp patches included.
- New: introduced #ifdef, #ifndef, #else, #endif, #define statements. This will allow to retrieve system values at runtime to create more flexible and powerful patches. Check the ReadMe_Macros.txt for all the details.
- New: you can search / filter the patches in the list. Just start typing the patch name to apply the filter.
- New: wildcard ?? support for patches.
- Fixed: Kern-Exec0 error when closing RomPatcher after a patch was applied.
- Fixed: doesn't unexpectedly crash when using large and complex patches.
- Fixed: RP+ can correcly patch contiguous shadow ram pages without any crash.
- Improved: the "Patch Info..." option shows all the information lines contained in the patch.


*** How to install ***
There exists many ways to install RomPatcher+, here's a couple of them:
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus_3.1.sis
2) If your phone has not been hacked yet, check out the file "LiteVersion\ReadMe.txt"


*** Change-Log v3.0 > v3.1 ***
+ New: Lite Version is already Signed, you don't need to sign it with a DevCert
+ Improved: InstallServer.rmp patch has been updated
+ Improved: RomPatcherAuto.exe has been renamed to RPPAuto.exe for better compatibility with Samsumg Omnia autostart.
+ NOTE: Due to UID change, you have to uninstall any previous RP+ version before installing RP+ 3.1 (but you can keep the *.ldd files)


Click below to download :
RomPatcherPlus V3.1 - NokiaVNN.com

RomPatcherPlus V3.1 Symbian^3 Nokia N8 C7 E7 X7 E6 C6-01 - Free App Download

ROMPATCHER+ v3.1
RomPatcher+ is an improved and fixed version of the RomPatcher software developed by ZoRn.
Using RomPatcher+ it is possibile to reach a new level of customization for you Symbian phone.


This is the list of the main differences in comparison with RomPatcher by ZoRn:
- New: compatibile with all the 3rh, 5th, S^3 devices
- New: support for compiled patches
- New: can dump the whole rom content to file \romdumpplus.dmp
- New: can dump the SuperPage content to file \superpage.dmp
- New: full support for DomainSrv.exe autostart, with Recovery Fault
- New: introduced new commands ord_rel, ord_snr which allow to patch DLL using ordinal
- New: can be integrated in cooked ROM firmware
- New: it is now possible to apply/remove patches with just 1 click.
- New: added vertical scrollbar.
- New: introduced the new command "+SuperPage" which allow to patch the RAM area where is stored the SuperPage.
- New: introduced support for a new commands, info: return: error: check the demo1-4.rmp patches included.
- New: introduced #ifdef, #ifndef, #else, #endif, #define statements. This will allow to retrieve system values at runtime to create more flexible and powerful patches. Check the ReadMe_Macros.txt for all the details.
- New: you can search / filter the patches in the list. Just start typing the patch name to apply the filter.
- New: wildcard ?? support for patches.
- Fixed: Kern-Exec0 error when closing RomPatcher after a patch was applied.
- Fixed: doesn't unexpectedly crash when using large and complex patches.
- Fixed: RP+ can correcly patch contiguous shadow ram pages without any crash.
- Improved: the "Patch Info..." option shows all the information lines contained in the patch.


*** How to install ***
There exists many ways to install RomPatcher+, here's a couple of them:
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus_3.1.sis
2) If your phone has not been hacked yet, check out the file "LiteVersion\ReadMe.txt"


*** Change-Log v3.0 > v3.1 ***
+ New: Lite Version is already Signed, you don't need to sign it with a DevCert
+ Improved: InstallServer.rmp patch has been updated
+ Improved: RomPatcherAuto.exe has been renamed to RPPAuto.exe for better compatibility with Samsumg Omnia autostart.
+ NOTE: Due to UID change, you have to uninstall any previous RP+ version before installing RP+ 3.1 (but you can keep the *.ldd files)


Click below to download :
RomPatcherPlus V3.1 - NokiaVNN.com

RomPatcherPlus V3.1 Symbian^3 Nokia N8 C7 E7 X7 E6 C6-01 - Free App Download

ROMPATCHER+ v3.1
RomPatcher+ is an improved and fixed version of the RomPatcher software developed by ZoRn.
Using RomPatcher+ it is possibile to reach a new level of customization for you Symbian phone.


This is the list of the main differences in comparison with RomPatcher by ZoRn:
- New: compatibile with all the 3rh, 5th, S^3 devices
- New: support for compiled patches
- New: can dump the whole rom content to file \romdumpplus.dmp
- New: can dump the SuperPage content to file \superpage.dmp
- New: full support for DomainSrv.exe autostart, with Recovery Fault
- New: introduced new commands ord_rel, ord_snr which allow to patch DLL using ordinal
- New: can be integrated in cooked ROM firmware
- New: it is now possible to apply/remove patches with just 1 click.
- New: added vertical scrollbar.
- New: introduced the new command "+SuperPage" which allow to patch the RAM area where is stored the SuperPage.
- New: introduced support for a new commands, info: return: error: check the demo1-4.rmp patches included.
- New: introduced #ifdef, #ifndef, #else, #endif, #define statements. This will allow to retrieve system values at runtime to create more flexible and powerful patches. Check the ReadMe_Macros.txt for all the details.
- New: you can search / filter the patches in the list. Just start typing the patch name to apply the filter.
- New: wildcard ?? support for patches.
- Fixed: Kern-Exec0 error when closing RomPatcher after a patch was applied.
- Fixed: doesn't unexpectedly crash when using large and complex patches.
- Fixed: RP+ can correcly patch contiguous shadow ram pages without any crash.
- Improved: the "Patch Info..." option shows all the information lines contained in the patch.


*** How to install ***
There exists many ways to install RomPatcher+, here's a couple of them:
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus_3.1.sis
2) If your phone has not been hacked yet, check out the file "LiteVersion\ReadMe.txt"


*** Change-Log v3.0 > v3.1 ***
+ New: Lite Version is already Signed, you don't need to sign it with a DevCert
+ Improved: InstallServer.rmp patch has been updated
+ Improved: RomPatcherAuto.exe has been renamed to RPPAuto.exe for better compatibility with Samsumg Omnia autostart.
+ NOTE: Due to UID change, you have to uninstall any previous RP+ version before installing RP+ 3.1 (but you can keep the *.ldd files)


Click below to download :
RomPatcherPlus V3.1 - NokiaVNN.com

RomPatcherPlus V3.1 Symbian^3 Nokia N8 C7 E7 X7 E6 C6-01 - Free App Download

ROMPATCHER+ v3.1
RomPatcher+ is an improved and fixed version of the RomPatcher software developed by ZoRn.
Using RomPatcher+ it is possibile to reach a new level of customization for you Symbian phone.


This is the list of the main differences in comparison with RomPatcher by ZoRn:
- New: compatibile with all the 3rh, 5th, S^3 devices
- New: support for compiled patches
- New: can dump the whole rom content to file \romdumpplus.dmp
- New: can dump the SuperPage content to file \superpage.dmp
- New: full support for DomainSrv.exe autostart, with Recovery Fault
- New: introduced new commands ord_rel, ord_snr which allow to patch DLL using ordinal
- New: can be integrated in cooked ROM firmware
- New: it is now possible to apply/remove patches with just 1 click.
- New: added vertical scrollbar.
- New: introduced the new command "+SuperPage" which allow to patch the RAM area where is stored the SuperPage.
- New: introduced support for a new commands, info: return: error: check the demo1-4.rmp patches included.
- New: introduced #ifdef, #ifndef, #else, #endif, #define statements. This will allow to retrieve system values at runtime to create more flexible and powerful patches. Check the ReadMe_Macros.txt for all the details.
- New: you can search / filter the patches in the list. Just start typing the patch name to apply the filter.
- New: wildcard ?? support for patches.
- Fixed: Kern-Exec0 error when closing RomPatcher after a patch was applied.
- Fixed: doesn't unexpectedly crash when using large and complex patches.
- Fixed: RP+ can correcly patch contiguous shadow ram pages without any crash.
- Improved: the "Patch Info..." option shows all the information lines contained in the patch.


*** How to install ***
There exists many ways to install RomPatcher+, here's a couple of them:
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus_3.1.sis
2) If your phone has not been hacked yet, check out the file "LiteVersion\ReadMe.txt"


*** Change-Log v3.0 > v3.1 ***
+ New: Lite Version is already Signed, you don't need to sign it with a DevCert
+ Improved: InstallServer.rmp patch has been updated
+ Improved: RomPatcherAuto.exe has been renamed to RPPAuto.exe for better compatibility with Samsumg Omnia autostart.
+ NOTE: Due to UID change, you have to uninstall any previous RP+ version before installing RP+ 3.1 (but you can keep the *.ldd files)


Click below to download :
RomPatcherPlus V3.1 - NokiaVNN.com

RomPatcherPlus V3.1 Symbian^3 Nokia N8 C7 E7 X7 E6 C6-01 - Free App Download

ROMPATCHER+ v3.1
RomPatcher+ is an improved and fixed version of the RomPatcher software developed by ZoRn.
Using RomPatcher+ it is possibile to reach a new level of customization for you Symbian phone.


This is the list of the main differences in comparison with RomPatcher by ZoRn:
- New: compatibile with all the 3rh, 5th, S^3 devices
- New: support for compiled patches
- New: can dump the whole rom content to file \romdumpplus.dmp
- New: can dump the SuperPage content to file \superpage.dmp
- New: full support for DomainSrv.exe autostart, with Recovery Fault
- New: introduced new commands ord_rel, ord_snr which allow to patch DLL using ordinal
- New: can be integrated in cooked ROM firmware
- New: it is now possible to apply/remove patches with just 1 click.
- New: added vertical scrollbar.
- New: introduced the new command "+SuperPage" which allow to patch the RAM area where is stored the SuperPage.
- New: introduced support for a new commands, info: return: error: check the demo1-4.rmp patches included.
- New: introduced #ifdef, #ifndef, #else, #endif, #define statements. This will allow to retrieve system values at runtime to create more flexible and powerful patches. Check the ReadMe_Macros.txt for all the details.
- New: you can search / filter the patches in the list. Just start typing the patch name to apply the filter.
- New: wildcard ?? support for patches.
- Fixed: Kern-Exec0 error when closing RomPatcher after a patch was applied.
- Fixed: doesn't unexpectedly crash when using large and complex patches.
- Fixed: RP+ can correcly patch contiguous shadow ram pages without any crash.
- Improved: the "Patch Info..." option shows all the information lines contained in the patch.


*** How to install ***
There exists many ways to install RomPatcher+, here's a couple of them:
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus_3.1.sis
2) If your phone has not been hacked yet, check out the file "LiteVersion\ReadMe.txt"


*** Change-Log v3.0 > v3.1 ***
+ New: Lite Version is already Signed, you don't need to sign it with a DevCert
+ Improved: InstallServer.rmp patch has been updated
+ Improved: RomPatcherAuto.exe has been renamed to RPPAuto.exe for better compatibility with Samsumg Omnia autostart.
+ NOTE: Due to UID change, you have to uninstall any previous RP+ version before installing RP+ 3.1 (but you can keep the *.ldd files)


Click below to download :
RomPatcherPlus V3.1 - NokiaVNN.com

How to Get Music Player Equalizer on Hacked Nokia Symbian^3 Phone?

  

Step 1: You need to have a hacked Symbian^3 Phone and enable open4all patch from ROM Patcher
Step 2: Extract the folders ("resource" & "sys") from "Music player equalizer for hacked S^3.zip" and copy them into C: drive using X-plore (If you aren't able to do this, probably you haven't hacked your Symbian^3 device properly in Step 1)
Step 3: Restart your phone

One Click Hacking Solution for Symbian^3 n Symbian Anna to Avoid Certificate Errors with Hello OX 2.11 - N8, C7, E7, C6-01, X7, E6

Earlier we posted hacking Symbian^3 - Nokia N8 with custom firmware by flashing with Phoenix, today we are going to post the easiest one click hacking method, by using latest Hello OX 2.11. It includes Rom Patcher v3.0 inside it and is capable to hack all Symbian^3 Smart Phones including the latest X7 and E6 with Symbian Anna. Hacking your phone would allow you to install any unsigned application without certificate error.


Steps Involved:
1. Get your certificate and key from here (If you already have your cert n key, skip the 1st step)


2. Download Hello OX 2.11Singer 





3. Sign it with your certificate and key using the Signer Application supplied .
4. Install Hello OX 2.11 unsigned.sis and run it.
5. It will perform all the processes itself and within a minute your phone will be hacked.


Note: In case you want to un-hack your phone again, just Run Hello OX 2.11 again from the menu and it will give you two options.


1. Un-hack your phone
2. Hack your phone again


Select the first option to un-hack your phone.


HelloOX2 is a One step Hacking tool for Symbian S60 3rd, 3rd FP1, 3rd FP2, 5th, Symbian^3 and Symbian Anna smartphones.


Hacking mean that getting full access to the phone's system files, with that capability, we can install a root certificate, and with the root certificate, we can install anything we want to mod the phone, include the Manufacturer capabilities requested apps. Completely fix annoying certificate error!


For example:
ROMPatcher+ is a Manufacturer capabilities requested app, using it to patch the installserver you'll be able to install any apps(include unsigned) without certificate error anymore.


HelloOX2 is here for everything you need. Hacking in only One step, just run it, it does all the rest for you. It has been tested and confirmed working on almost all Symbian S60 3rd(FP1, FP2), 5th, Symbian^3 and Symbian Anna devices, include the latest phone models Nokia E6-00, X7-00, N8-00, E7-00, C7-00, C7 Astound, C6-01, C5-03, E5-00...etc.


Click below to download


HelloOX2.v2.11.Signer.exe - Nokiavnn.com

HelloOX2.v2.11.unsigned.sis - Nokiavnn.com

How to Flash and Hack Nokia N8 with Custom Firmware to Avoid Certificate Errors via Phoenix

This Tutorial is definitely a complex one, for your ease we have now posted one click hacking for Symbian^3 by using Hello OX 2.11 over here.


This Guide is for Power Users who are capable to take Risks and know to play with technical stuff.
Video Tutorial:








Notes:
a. Flash at your own risk, we bear no responsibility for any problem(s) occurring to your device due to flashing...
b. Uninstalling is only possible after the first Restart of phone!
c. The internal file manager does not show the system folder (have deliberately left out)
d. This flashing process has been tested on Win XP 32 bit and Windows 7 32 Bit
e. Its better to turn off antivirus while flashing
f. Press *#0000# to see your Product Code
g. In photos, RM-596 FW is taken as an example, u can take any Symbian device and firmware
h. and make sure you are not downgrading i.e flashing the lower version than the current device version (It will make your phone dead) (For instance you have firmware version 14.2 and you are flashing with firmware version 13.1, in that case you will brick your phone)
i. make sure you are not flashing an edited rofs2 or rofs3... (You have to use overwrite trick for flashing with hacked UDA, more details are mentioned at Step no 10)


Basic requirements:


i.) Download NaviFirm from here and Pheonix from here


ii.) Open NaviFirm which u downloaded from the above link, select your device + product code [see note f] and download the following 9 files (while downloading, focus on the extensions, which I have mentioned in bold letters below and keep an extra backup of these Original Files):
1. 0x0-0xxxx0_Pxxxx_00x.xml (Type Label Configuration)
2. 0xxxx0vx.pcx (Type Label Picture)
3. RM-xxx_014.002_14.0x_xxx_x_79.92_prd.rofs2.fpsx
4. RM-xxx_014.002_79.92_prd.core.fpsx
5. RM-xxx_014.002_Cxx.xx_xxx_1_xxx_79.92_prd.rofs3.fpsx
6. RM-xxx_014.002_Uxx.xx_79.92_prd.uda.fpsx (Content)
7. RM-xxx_0xxxxxx_014.002_00x.dcp
8. RM-xxx_0xxxxxx_014.002_00x.vpl
9. RM-xxx_0xxxxxx_014.002_00x_signature.bin


Sometimes it may not show you the 9 files which is mentioned above and may show only 6 files... In this case try to switch between the Nokia Care and Product External, as sometimes one of these source will have full files... See an example below for understanding:








iii.) Turn off your Antivirus, install the Pheonix which u have downloaded from the above link and restart ur system...


Now u r ready for flashing, follow the brief steps below CAREFULLY to avoid frustration and problems...


Brief steps of flashing to solve the crc checksum error:


1. Rename the provided uda file to your uda file name 'RM-xxx_014.002_U0x.0x_xx.xx_prd.uda.fpsx'
2. Copy paste the original 9 firmware files which u have downloaded through NaviFirm to C:/Program Files/Nokia/Phoenix/Products/RM-xxx/
3. Connect ur device (C7/N8/E7/xx) through Ovi Suite and wait if any drivers’ installation is in progress
4. When driver installation in done and it shows that drivers are up-to-date, then execute Phoenix (better right click and run as administrator)





5. Go to Manage Connection > USBx - RM-xxx







6. Go to File > Scan Product > and wait until the bottom bar of the phoenix says ready and will display your phone's connection








7. Go to Flashing > Firmware Update > Choose your product code (05xxxxx)













8. Press Refurbish button!





9. There will be a warning about the file is not complete / missing bla..bla..bla.. (this step is important)





10. This is very important!!! Don’t press anything in Pheonix yet and go to the provided hacked uda!
11. Copy paste the provided CFW / hacked UDA file (that has been renamed) to C:/Program Files/Nokia/Phoenix/Products/RM-xxx/ and overwrite it. If its not over written, probably you have to rename it according to the original firmware UDA.
12. Now come back to Phoenix and press ‘YES’...





13. Wait until flashing process completes... And then, u r Done!!!





Now your Nokia N8 has been hacked with Random User's Custom Firmware. You can easily install unsigned Applications which used to give annoying certificate errors. Rom Patcher v3.0 can now be installed on your Phone. You can also disable the Call Recording Beep using Rom Patcher.

Patch: How to Remove Call Recording Beep on Nokia N8 with Rom Patcher v3.0?

There exists no call recorder that is able to stop Recording BEEP during call recording on Nokia N8, modders and hackers have managed to develop ROM Patcher v3.0 which supports Symbian^3 Smart Phones. Using ROM Patcher you can use RemoveRecordingTone_S^3.rmp patch to eliminate the BEEP during call recording utilizing any call recording app.


Requirements and Steps involved:


Hack your Phone
Install ROM Patcher v3.0
Put RemoveRecordingTone_S^3.rmp inside E:/Patches
Run ROM Patcher v3.0 and activate the RemoveRecordingTone_S^3.rmp patch.


Now you can record the call on your Nokia N8 without any Recording BEEP! :)


Click below to download


[Nokiavnn.com]RemoveRecordingTone S^3.zip

RomPatcher+ v3.0 with Symbian^3 Support - For Hacked Nokia N8, C7, E7, C6-01 - Full Version App Download

RomPatcher+ is an improved and fixed version of the RomPatcher software developed by ZoRn. Using RomPatcher+ it is possibile to reach a new level of customization for you Symbian phone.

Hack your phone using Hello OX 2.11 and RomPatcher v3.0 would get installed automatically.

Change-Log RP > RP+
This is the list of the main differences in comparison with RomPatcher by ZoRn:
- New: compatibile with all the 3rh, 5th, S^3 devices
- New: support for compiled patches
- New: can dump the whole rom content to file \romdumpplus.dmp
- New: can dump the SuperPage content to file \superpage.dmp
- New: full support for DomainSrv.exe autostart 
- New: introduced new commands ord_rel, ord_snr which allow to patch DLL using ordinal
- New: can be integrated in cooked ROM firmware.
- New: it is now possible to apply/remove patches with just 1 click.
- New: added vertical scrollbar.
- New: introduced the new command "+SuperPage" which allow to patch the RAM area where is stored the SuperPage.
- New: introduced support for a new commands, info: return: error: check the demo1-4.rmp patches included.
- New: introduced #ifdef, #ifndef, #else, #endif, #define statements. This will allow to retrieve system values at runtime to create more flexible and powerful patches. Check the ReadMe_Macros.txt for all the details.
- New: you can search / filter the patches in the list. Just start typing the patch name to apply the filter.
- New: wildcard ?? support for patches.
- Fixed: Kern-Exec0 error when closing RomPatcher after a patch was applied.
- Fixed: doesn't unexpectedly crash when using large and complex patches.
- Fixed: RP+ can correcly patch contiguous shadow ram pages without any crash.
- Improved: the shadow ram memory is now fully released when a patch is removed.
- Improved: the "Patch Info..." option shows all the information lines contained in the patch.

Change-Log RP+ v2.6 > v3.0: (Version jumped to v3.0 due to S^3 support)
+ New: RP+ now supports also Symbian^3 devices! All the 3rd/5th/S^3 devices are fully supported 
+ Improved: InstallServer.rmp patch has been updated to support S^3 devices too. The old Open4All.rmp patch is already working on S^3 too, without any change.
+ Improved: removed the "Donate with SMS" option, it was used by too few people.
+ Fixed: sometimes the "RP+ Recovery Fault" message was wrongly shown, it should be definitely fixed.

Click below to download


[Nokiavnn.com]RomPatcherPlus 3.0.zip

Latest Version => http://www.nokiavnn.com/2011/07/rompatcherplus-v31-symbian3-nokia-n8-c7.html